Skip to content

How to install printer HP DeskJet Ink Advantage 2136

How do I install a HP DeskJet 2136 printer

How to setup printer HP DeskJet 2136

Follow the next instructions to install printer HP DeskJet 2136; download the driver for free and configure your printer correctly. You can also check the HP 2136 Ink Cartridges compatibility and how to set them up correctly. If you only need the HP 2136 Printer driver, go to step 6.

Installation manual valid for HP DeskJet Ink Advantage 2135, HP DeskJet 2130, HP DeskJet 2132, HP DeskJet 2134, HP DeskJet 2136, HP DeskJet 2138 printer series.

Step 1:

HP DeskJet 2136

If this is a new printer, you have to be sure that you are removing all tape and package materials. Remember that there is more tape inside the printer, when you open the ink cartridge access door. Pay attention to this or you are going to have problems later.

How to install printer HP DeskJet Ink Advantage 2136
  • A) You should take any tape out and also all plastic protections. It makes no sense to keep them there, they are just going to accumulate dust if you let them there. Take it off now.
  • B) Make sure everything is in the box. In the box you will see and small list of what is inside.
  • C) Take the printer out of the box.
  • D) Remove all tape and package materials from the outside of the printer and place the printer in horizontal position.
  • E) Lower the output tray, reach inside the printer, and then grasp the handle and lower the ink cartridge access door to open it.
How to install printer HP DeskJet Ink Advantage 2136
Open the ink cartridge access door
  • F) Take off all tape and package materials from inside the printer.
How to install printer HP DeskJet Ink Advantage 2136
Remove the tape and package materials
  • G) Make sure you remove all hardware and materials from the box before discarding or recycling the box and package materials. Close the ink cartridge access door.
How to install printer HP DeskJet Ink Advantage 2136
Close the ink cartridge access door

Step 2:

Plug in HP Deskjet 2136 printer

  • A) Find the power cord in the box. And connect it to the electrical source.
  • B) Now plug the cable to the back of the printer. You will see that the electrical port has the shape of a number “8”.
How to install printer HP DeskJet Ink Advantage 2136
Connect the power cord

IMPORTANT: Please do not plug in the USB cable yet.

  • C) Once the printer is plugged in to the energy source, press the turn on button.

Start

Step 3:

HP 664 Ink Cartridges for HP Deskjet 2136 printer

This printer needs 2 HP 664 Ink Cartridges: one Black Ink Cartridge and one Color Ink Cartridge. Follow the next instructions to install them correctly. To know more about the compatibility of HP 664, click here.

  • A) Find the Ink Cartridges included in the box.
  • B) Open the ink cartridge access door.
Open the ink cartridge access door
Open the ink cartridge access door
  • C) When the printer turns on, the carriage will move to the center of the printer, in position to install the Ink cartridges.
  • D) Wait until the carriage is idle and silent before you continue.
  • E) Remove one of the ink cartridges from its package. Be careful to only touch the black plastic on the ink cartridge.
Remove the ink cartridge from its package
Remove the ink cartridge from its package
  • F) Take off the plastic sticker.
Remove the plastic tape
Remove the plastic tape

IMPORTANT: Do not touch the copper-colored contacts or the ink nozzles. Do not replace the protective tape on the contacts. Handling these parts can result in clogs, ink failure, and bad electrical connections.

  • G) Hold the ink cartridge by its sides with the nozzles toward the printer, and then insert the ink cartridge into its proper slot.
  • H) Insert the Black Ink Cartridge in the right slot.
  • I) Make sure that you are inserting the ink cartridge in the correct slot and the push it with your finger gentile until it snaps into place.
Snap the ink cartridge into place
Snap the ink cartridge into place
  • J) Repeat steps E’, ‘F’, ‘G’, ‘H’ & ‘I’ with the Color Ink Cartridge.
  • K) Insert the Color Ink Cartridge in the left slot and snap it into its place.
Insert the Color Ink Cartridge in the left slot
Insert the Color Ink Cartridge in the left slot
  • L) Close the ink cartridge access door.
Open the ink cartridge access door
Open the ink cartridge access door

Start

Step 4:

Loading paper into the HP 2136 printer

  • A) Raise the input tray.
Raise the input tray
Raise the input tray
  • B) Remove any paper from the input tray that is different than the type of paper you want to load.
  • C) Slide the paper width guide as far as possible to the left.
Slide the paper width guide to the left
Slide the paper width guide to the left
  • D) Load a stack of U.S. letter, A4, or legal size paper into the input tray with the short edge forward and the print-side facing closest to you.
Load the paper into the input tray
Load the paper into the input tray
  • E) Push the stack into the tray until it stops.
  • F) Slide the paper width guide to the right until it rests at the edge of the paper.
Slide the paper width guide to the right
Slide the paper width guide to the right
  • G) Lower the output tray.
  • H) Pull out the output tray extender.
Lower-the-output-tray-and-pull-out-the-output-tray-extender
Lower the output tray and pull out the output tray extender

Start

Step 5:

Configure HP Deskjet 2136 Printer

Before you can use your printer, any new Ink cartridge needs to be align first. To do this, the printer is going to print, automatically, an alignment page. Take the alignment page and follow the next instructions to align the HP ink cartridges correctly:

  • A) After loading the paper, the printer automatically prints an alignment page.
  • B) Take the alignment page and lift the scanner lid.
  • C) Place the alignment page with the print side down on the scanner glass, and then position it according to the engraved guides around the glass.
Place the alignment page on the scanner glass
Place the alignment page on the scanner glass
  • D) Close the scanner lid.
  • E) Press the Start “Copy Black button” or the Start “Copy Color button” on the control panel of the printer. The printer aligns the ink cartridges.
  • F) The printer will align the ink cartridges automatically.

Step 6:

Driver HP DeskJet 2136

To be able to install the Driver for the HP DeskJet 2136 printer, you must have the hardware already settled up first, otherwise, the software will not let you go through. You must wait until the installation software ask you to do it. That is the main reason to not plug in the USB cable yet.

  • A) Find the installation software included in the box.
  • B) If for some reason you don’t have or you are not able to use the software that came in with the printer, go to Step “D”.
  • C) Insert the software disk in your computer and open it in the Windows Explorer (you can find it in “My Computer“).
Insert the software disk in your computer
Insert the software disk in your computer
  • D) You can download here the drivers & software for the printer for FREE:

HP DeskJet 2136 Driver

Download Driver HP Deskjet Ink Advantage 2136 Windows

Download Driver HP Deskjet Ink advantage 2136 Apple MAC


NOTE: This package includes the installation software and Drivers, installer and optional software.

Congratulations. You have finished installing your HP DeskJet 2136 printer successfully. Nice job!!

How to scan with HP DeskJet 2136?

HP 664 Ink Cartridge Replacements

Start

Summary
How to install printer HP DeskJet Ink Advantage 2136 🥇
Article Name
How to install printer HP DeskJet Ink Advantage 2136 🥇
Description
🥇 How to setup printer HP DeskJet 2136: 1. Unbox the printer 2. Plug in the power cord 3. Set up the Ink Cartridges for HP 2136 4. Load paper 5. Align Cartridges 6. Download HP DeskJet 2136 Driver
Author
Publisher Name
InstallingPrinter.com
Publisher Logo
Advertisment ad adsense adlogger