Skip to content

How to install printer HP OfficeJet 3833

How do I install a HP OfficeJet 3833 printer

How to setup printer HP OfficeJet 3833

Follow the next instructions to install printer HP OfficeJet 3833; download the driver for free and configure your printer correctly. You can also check the HP 3833 Ink Cartridges compatibility and how to set them up correctly. If you only need the HP 3833 Printer driver, go to step 6.

Installation manual valid for HP OfficeJet 3830, HP OfficeJet 3831, HP Deskjet Ink Advantage 3835, HP OfficeJet 3833 & HP Deskjet Ink Advantage Ultra 5739, HP Deskjet Ink Advantage Ultra 5738, HP Deskjet Ink Advantage Ultra 5730 printer series.

Step 1:

HP OfficeJet 3833

If this is a new printer, you have to be sure that you are removing all tape and package materials. Remember that there is more tape inside the printer, when you open the ink cartridge access door. Pay attention to this or you are going to have problems later.

How to install printer HP OfficeJet 3833
  • A) You should take any tape out and also all plastic protections. It makes no sense to keep them there, they are just going to accumulate dust if you let them there. Take it off now.
  • B) Make sure everything is in the box. In the box you will see and small list of what is inside.
  • C) Take the printer out of the box.
  • D) Remove all tape and package materials from the outside of the printer and place the printer in horizontal position.
How to install printer HP OfficeJet 3833
Remove all tape and package materials from the outside of the printer
  • E) Lower the output tray, reach inside the printer, and then grasp the handle and keep removing the tape.
How to install printer HP OfficeJet 3833
Remove all tape and package materials from inside the printer
  • F) Open the cartridge access door and remove the remaining package materials from inside the printer.
How to install printer HP OfficeJet 3833
Open the cartridge access door and remove the remaining tape
  • G) Make sure you remove all hardware and materials from the box before discarding or recycling the box and package materials and close the access door and then close the exterior door.

Step 2:

Plug in HP OfficeJet 3833 printer

  • A) Find the power cord in the box. And connect it to the electrical source.
  • B) Now plug the cable to the back of the printer. You will see that the electrical port has the shape of a number “8”.
How to install printer HP OfficeJet 3833
Connect the power cord
  • C) Once the printer is plugged in to the energy source, press the turn on button.
How to install printer HP OfficeJet 3833
Press the power button
  • D) On the printer control panel, the Language menu displays. Select your language
  • E) Select your preferred language, and then touch Yes to confirm your choice.So the Country/Region menu displays.
How to install printer HP OfficeJet 3833
Select the language
  • F) Touch your specific country/region, and then touch Yes to confirm your choice. The Date/Time menu will display.
  • G) Select the date, and then touch Next.
  • H) Choose the time, and then touch Done.

IMPORTANT: Please do not plug in the USB cable yet.

Start

Step 3:

HP 664 Ink Cartridges for HP OfficeJet 3833 printer

This printer needs 2 HP 664 Ink Cartridges: one Black Ink Cartridge and one Color Ink Cartridge. Follow the next instructions to install them correctly. To know more about the compatibility of HP 664, click here.

  • A) Find the Ink Cartridges included in the box.
  • B) Open the ink cartridge access door.
Open cartridge access door again
Open cartridge access door again.
  • C) When the printer turns on, the carriage will move to the center of the printer, in position to install the Ink cartridges.
  • D) Wait until the carriage is idle and silent before you continue.
  • E) Remove one of the ink cartridges from its package. Be careful to only touch the black plastic on the ink cartridge.
Remove the ink cartridge from its package
Remove the ink cartridge from its package
  • F) Take off the plastic sticker.
Remove the plastic tape
Remove the plastic tape

IMPORTANT: Do not touch the copper-colored contacts or the ink nozzles. Do not replace the protective tape on the contacts. Handling these parts can result in clogs, ink failure, and bad electrical connections.

  • G) Hold the ink cartridge by its sides with the nozzles toward the printer, and then insert the ink cartridge into its proper slot.
  • H) Insert the Black Ink Cartridge in the right slot.
  • I) Make sure that you are inserting the ink cartridge in the correct slot and the push it with your finger gentile until it snaps into place.
Snap the ink cartridge into place
Snap the ink cartridge into place
  • J) Repeat steps E’, ‘F’, ‘G’, ‘H’ & ‘I’ with the Color Ink Cartridge.
  • K) Insert the Color Ink Cartridge in the left slot and snap it into its place.
Insert the Color Ink Cartridge in the left slot
Insert the Color Ink Cartridge in the left slot
  • L) Close the ink cartridge access door.
Close the cartridge access door and external door
Close the cartridge access door and external door

Start

Step 4:

Loading paper into the HP 3833 printer

  • A) Raise the input tray.
  • B) Remove any paper from the input tray that is different than the type of paper you want to load.
  • C) Slide the paper width guide as far as possible to the left.
Slide the paper width guide to the left
Slide the paper width guide to the left
  • D) Load a stack of U.S. letter, A4, or legal size paper into the input tray with the short edge forward and the print-side facing closest to you.
  • E) Push the stack into the tray until it stops.
  • F) Slide the paper width guide to the right until it rests at the edge of the paper.
Load paper and Slide the paper width guide to the right
Load paper and Slide the paper width guide to the right
  • G) Pull out the output tray, and then raise the tray extender.
Pull out the output tray, and then raise the tray extender.
Pull out the output tray, and then raise the tray extender.

Start

Step 5:

Configure HP OfficeJet 3833 Printer

Before you can use your printer, any new Ink cartridge needs to be align first. To do this, the printer is going to print, automatically, an alignment page. Take the alignment page and follow the next instructions to align the HP ink cartridges correctly:

  • A) After loading the paper, the printer automatically prints an alignment page.
  • B) Take the alignment page and lift the scanner lid.
  • C) Place the alignment page with the print side down on the scanner glass, and then position it according to the engraved guides around the glass.
Place the alignment page on the scanner glass
Place the alignment page on the scanner glass
  • D) Close the scanner lid.
  • E) Touch OK to scan the page and complete the ink cartridge alignment.
Press OK
Press OK
  • F) The printer will align the ink cartridges automatically.

Step 6:

Driver HP OfficeJet 3833

To be able to install the Driver for the HP OfficeJet 3833 printer, you must have the hardware already settled up first, otherwise, the software will not let you go through. You must wait until the installation software ask you to do it. That is the main reason to not plug in the USB cable yet.

  • A) Find the installation software included in the box.
  • B) If for some reason you don’t have or you are not able to use the software that came in with the printer, go to Step “D”.
  • C) Insert the software disk in your computer and open it in the Windows Explorer (you can find it in “My Computer“).
Insert the software disk in your computer
Insert the software disk in your computer
  • D) You can download here the drivers & software for the printer for FREE:

HP OfficeJet 3833 Driver

Download Driver HP Officejet 3833 Windows

Download Driver HP Officejet 3833 Apple MAC


NOTE: This package includes the installation software and Drivers, installer and optional software.

Congratulations. You have finished installing your HP OfficeJet 3833 printer successfully. Nice job!!

How to scan with HP OfficeJet 3833?

HP 664 Ink Cartridge Replacements

Start

Installation manual valid for HP OfficeJet 3830, HP OfficeJet 3831, HP Deskjet Ink Advantage 3835, HP OfficeJet 3833 & HP Deskjet Ink Advantage Ultra 5739, HP Deskjet Ink Advantage Ultra 5738, HP Deskjet Ink Advantage Ultra 5730 printer series.

Summary
How to install printer HP OfficeJet 3833 🥇
Article Name
How to install printer HP OfficeJet 3833 🥇
Description
🥇 How to setup printer HP OfficeJet 3833: 1. Unbox the printer 2. Plug in the power cord 3. Set up the Ink Cartridges for HP 3833 4. Load paper 5. Align Cartridges 6. Download HP OfficeJet 3833 Driver
Author
Publisher Name
InstallingPrinter.com
Publisher Logo
Advertisment ad adsense adlogger